JustMakeWeb.com รับทำเว็บไซต์ รับทำเว็บโรงแรม รับทำเว็บขายของ รับทำเว็บบริษัท เว็บสำเร็จรูป รับทำเว็บร้านค้า ออกแบบเว็บไซต์ ใช้งานได้ง่าย รองรับ SEO โปรโมท GOOGLE ให้ติดอันดับได้อย่างรวดเร็ว , ลงโฆษณาฟรี VPS ราคาถูก

มีผู้ชม 77 ครั้ง

Binks infinity diaphragm pumps have made large volume delivery possible and they are highly durable.

Ideal for abrasive coatings, high solids and shear sensitive paints. Highly reliable as the paint supply for HVLP and LVMP, and also the perfect option for a tight budget.The pump will not be damaged even when you have run out of the paints. Infinity diaphragm pumps can be used widely from just one gun to large volume supply using multiple guns.


  • Ideal for handling abrasive liquids and liquids containing hard particles
    Binks pumps are not use rotating or sliding seals, so many process engineers are considering using them when handling such liquids. In case the pump is run dry, the damage can be minimized.
  • "Unbalanced" air valve makes it “not stop” even when air pressure is low. Due to its unique design, this valve does not stop in the middle when the pump is stopped.
    • Solved the pump stop problem. Move with significantly less air pressure than competitors.
    • Lubrication oil is not required. Even air that is somewhat dirty can be used.
  • Easy start with fully self-priming. The liquid check valve in the pump is located near the diaphragm pump chamber and reliably starts self-priming. Runs immediately when the pump is dry condition.
  • The air motor valve is designed to apply a constant air pressure to the induction valve and the main shift valve, thus further performance improvement and pulsation reduction have been achieved.
  • Stainless steel seats applied for all pumps and stainless steel or PTFE balls are equipped depending on your applications.


Material list

No. Body Sheet Ball Diaphragm
818830 Stainless Stainless Stainless PTFE
818831 Conductive acetal Stainless Stainless PTFE
818823 Stainless Stainless Stainless PTFE



Product No. 818830 (Stainless)
818831 (Conductive acetal)
818823 (Stainless) 818810 (Stainless)
Outlet size 1/2" 1" 1-1/2"
Pressure ratio 1:1 1:1 1:1
Air inlet pressure 0.1-0.69MPa 0.14-0.83MPa 0.1-0.83MPa
Hydrostatic pressure 0.1-0.69MPa 0.14-0.83MPa 0.1-0.83MPa
Max.delivery (Stainless steel) 49L/min 132L/min 340L/min
Max.delivery (Conductive acetal) 49L/min - -
Inhalable particle size 2.4mm 3.2mm 6.4mm
Working temperature (Stainless) 5-82℃ 5-66℃ 5-66℃
Working temperature (Conductive acetal) 5-82℃ - -
Flow rate per cycle (Stainless) 0.15L 0.60L 2.76L
Flow rate per cycle (Conductive acetal) 0.083L - -
Noise bell (with muffler) @60Cyc/Min 71.1dB(A) 64.5dB(A) 77.7dB(A)
Air motor Unbalance Unbalance Unbalance
Diaphragm material PTFE PTFE PTFE
Sheet 316 Stainless Stainless Stainless
Ball (Standard) 316 Stainless Stainless Stainless
Weight (Stainless) 6.6kg 16.3kg 38.1kg
Weight (Conductive acetal) 4.0kg - -



Product No. 818830 (Stainless)
818831 (Conductive acetal)
818823 (Stainless) 818810 (Stainless)
Air control 849303 849303 849303
Wall bracket 873116 873115 873134
Suction hose 1.5m hose with strainer 1.5m hose with strainer -
for 20L 874504 874500 -
for 200L - 874501 -